jet bike
2 posters
RigidChips :: Rigid-Chips :: Files :: Cars
Page 1 of 1
jet bike
jet bike arows to control b and f are for stand
freek4ever- Tank
- Posts : 97
Join date : 2011-08-26
Age : 27
Location : nederland holand
Re: jet bike
Oh wow that looks Nice! are you going to release/publish it?
darkeye22- Tank
- Posts : 55
Join date : 2011-06-01
Location : Stuck inside RigidChips trying to find a way out
Re: jet bike
haha dit only releaed the picture how stupit
jes i will
jes i will
- Code:
// [RCD]
Val
{
OP(default=-30, min=-30, max=90)
PO(default=0, min=-100000000000, max=1000000000)
PO2(default=0, min=-100000000000, max=10000000000)
ROLL(default=20, min=-30, max=30)
ST(default=0, min=-15, max=15, step=5)
ST2(default=90, min=70, max=110, step=5)
W(default=0, min=-400000, max=100000, step=5000)
W2(default=0, min=-10, max=10, step=5)
}
Key
{
0:W(step=500), W2(step=5)
1:W(step=-500), W2(step=-5)
2:ST(step=5), ST2(step=-5)
3:ST(step=-5), ST2(step=5)
11:OP(step=10)
12:OP(step=-10)
}
Body
{
Core(name=H) {
N:Frame(angle=-120) {
N:Cowl(option=5, color=#42D24D, effect=#D0FB) { }
E:Cowl(angle=-70, color=#606060) {
N:Cowl(angle=-80, option=0, color=#FF0000, effect=#00FF) { }
}
W:Cowl(angle=-70, color=#606060) {
N:Cowl(angle=-80, color=#FF0000) { }
}
S:TrimF(angle=ST2, color=#606060) {
S:Wheel(angle=180, power=W, option=2, color=#606060, effect=4) { }
}
N:Cowl(angle=180) {
S:Cowl(angle=-130, color=#606060) {
S:Cowl(angle=-30, color=#606060) { }
}
}
}
N:Frame(angle=150) {
W:Cowl(angle=-90, option=4, color=#606060) {
S:Cowl(option=4, color=#606060) {
E:Cowl(option=4, color=#606060) { }
}
}
E:Cowl(angle=-90, option=3, color=#606060) {
S:Cowl(option=3, color=#606060) {
W:Cowl(option=3, color=#606060) { }
S:Cowl(angle=-90, option=#606060, color=#606060) {
S:Cowl(angle=-90, color=#606060) { }
N:Cowl(angle=-90, color=#606060) { }
}
}
}
N:Frame(angle=30) {
W:Cowl(angle=70) {
W:Cowl(angle=80, color=#FF0000) { }
}
E:Cowl(angle=70) {
E:Cowl(angle=80, color=#FF0000) { }
}
S:Weight(option=8) { }
N:Frame() {
W:Frame(angle=OP) { }
E:Frame(angle=OP) { }
W:Cowl(angle=70) {
W:Cowl(angle=80) {
N:Cowl(angle=30) { }
}
}
E:Cowl(angle=70) {
E:Cowl(angle=80) {
N:Cowl(angle=30) { }
}
}
N:Cowl(angle=30) {
E:Cowl(angle=70) { }
W:Cowl(angle=70) { }
}
}
}
}
S:Trim(angle=90) {
S:Chip() {
S:Rudder(angle=-45) {
S:Rudder(angle=-45) {
N:Chip() { }
}
}
}
}
S:Frame() {
S:TrimF(angle=-ST) {
S:Chip() {
E:Jet(power=po2) { }
W:Jet(power=po) { }
W:Chip() { }
E:Chip() { }
}
}
}
}
}
Script
{PRINT 0, _AX(CORE)
po =((_AX(CORE)*95000)+(_AZ(CORE)* 750000))+8000
po2 =((_AX(CORE)*95000) -(_AZ(CORE)*750000))+8000}
freek4ever- Tank
- Posts : 97
Join date : 2011-08-26
Age : 27
Location : nederland holand
Re: jet bike
Nice =) although at moderate speeds the turning is kind of jerky, and when you are going fast(300KM/H) there is no way to stop if you are heading right for a wall, so i would add a Air-Brake for someway to slow down, other wise this is a Very Nice bike, I have never seen any good bikes So.... I Give You 8 Dark Stars. XD
darkeye22- Tank
- Posts : 55
Join date : 2011-06-01
Location : Stuck inside RigidChips trying to find a way out
Re: jet bike
just wat i expektet
freek4ever- Tank
- Posts : 97
Join date : 2011-08-26
Age : 27
Location : nederland holand
Re: jet bike
but i wil fiks it
freek4ever- Tank
- Posts : 97
Join date : 2011-08-26
Age : 27
Location : nederland holand
RigidChips :: Rigid-Chips :: Files :: Cars
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum