RigidChips
Would you like to react to this message? Create an account in a few clicks or log in to continue.

onejet hover finge

4 posters

Go down

onejet hover finge  Empty onejet hover finge

Post by freek4ever Thu Nov 24, 2011 12:14 pm

Code:
// [RCD]
Val
{
   A(default=0, min=-1000, max=1000)
   B(default=0, min=-1000, max=1000)
   C(default=0, min=-10000, max=30000)
   D(default=0, min=-1000, max=1000)
   F(default=0, min=-1000, max=1000)
   G(default=0, min=-1000, max=1000)
   H(default=0, min=-45, max=45)
   L(default=0, min=-1000, max=1000)
   N(default=0, min=-1000, max=1000)
   OP(default=0, min=-40, max=40)
   OP2(default=0, min=-40, max=40)
   PO(default=0, min=-10000, max=30000, step=1000)
   ST(default=0, min=-10, max=10, step=10)
   ST2(default=-10, min=-20, max=0, step=1)
   V(default=0, min=-10000, max=30000)
   X(default=0, min=-1000, max=1000)
   Y(default=0, min=-1000, max=1000)
}
Key
{
   0:po(step=1000)
   1:po(step=-1000)
   2:st(step=10), st2(step=-10)
   3:st(step=-10), st2(step=10)
}
Body
{
   Core() {
      E:Trim(angle=-h) { }
      W:Trim(angle=h) { }
      S:Chip() {
         S:Chip() {
            W:Trim(angle=h) { }
            E:Trim(angle=-h) { }
         }
         E:Frame(angle=-90) {
            S:Chip(angle=-st) { }
         }
         W:Frame(angle=-90) {
            W:Chip(angle=-90) {
               S:Chip() {
                  S:Chip(angle=op) {
                     E:Trim(angle=-op2, color=c, name=1) { }
                     W:Trim(angle=-op2, color=c, name=2) { }
                  }
                  N:Trim(angle=90) { }
               }
            }
            S:Chip(angle=st) { }
         }
         S:Jet(angle=-90, power=PO) { }
         W:Chip() { }
         E:Chip() { }
      }
   }
}
Script
{
op  =- _AX(core) *50 +g
op2  = _AZ(core) *30 +d



B=  n -_Y(core)
A = -b-10
h =  a

if _KEY(4) >0
{
N = _Y(core) +1
}



v =_VEL (core)

c=c +10000

if _MR>0 {
c = #FF0000

}

if _ML>0 {
c = #0000FF

}


if _MM()>0 {g= 100}

if _MM()<1 {g= 0}

if _ML()>0 {l= 70}

if _ML()<1 {l= 0}


if _Mr()>0 {f= -70}

if _Mr()<1 {f= 0}






d= l+f











}
freek4ever
freek4ever
Tank
Tank

Posts : 97
Join date : 2011-08-26
Age : 27
Location : nederland holand

Back to top Go down

onejet hover finge  Empty Re: onejet hover finge

Post by darkeye22 Thu Dec 08, 2011 8:51 pm

Oh this is nice! Very Happy I have never seen a plane/aircraft like this before. trying to figure out the controls was confusing at first but it flies really well other then its kind of hard to get off the ground and the turning is kind of crazy.
darkeye22
darkeye22
Tank
Tank

Posts : 55
Join date : 2011-06-01
Location : Stuck inside RigidChips trying to find a way out

Back to top Go down

onejet hover finge  Empty Re: onejet hover finge

Post by freek4ever Sat Dec 10, 2011 3:52 pm

Z is the Kay for set altetude and the first version was analog controls look again tis is te new one press one of the mouse butons it will make loops and rolls
freek4ever
freek4ever
Tank
Tank

Posts : 97
Join date : 2011-08-26
Age : 27
Location : nederland holand

Back to top Go down

onejet hover finge  Empty Re: onejet hover finge

Post by darkeye22 Mon Dec 12, 2011 9:53 am

yeah I figured out that you can do loops/rolls if you left/right click with the mouse and go up if you press Z, but I could not find a way to go down :\ .
Oh and you should post the control for your models when you release them if you did't put them on your model, so that it is easier for New-Players and people that don't want to try and figure out the controls them self.
Freek4ever wrote:Am I the user that is te most active? Sleep that is sad

You are the most active poster, everyone is just waiting for someone to post a model or start a conversation, that is why it seems like you are the most active, because you post in topics the most. Oh and if you click on MemberList on the bar up at the top of the page you can see who logged in the most resent and I sign around two/three times everyday so i am usually in the top 5(except for yesterday, because I was busy all day)


EDIT : Oh and most of the Old/Experienced players sort of lost interest in RigidChips so they don't post very often and not very many new players find us :\
darkeye22
darkeye22
Tank
Tank

Posts : 55
Join date : 2011-06-01
Location : Stuck inside RigidChips trying to find a way out

Back to top Go down

onejet hover finge  Empty Re: onejet hover finge

Post by freek4ever Wed Dec 14, 2011 7:54 am

i no but if there are a lot of words on this site you wil find it easier

like you type jet in Google he searts for te site whit jet in it
Moore times' jet' on a site the chance will by higher to find is

so keep posting
freek4ever
freek4ever
Tank
Tank

Posts : 97
Join date : 2011-08-26
Age : 27
Location : nederland holand

Back to top Go down

onejet hover finge  Empty Re: onejet hover finge

Post by RA2lover Wed Dec 14, 2011 8:17 am

google fixed spamdexing a long time ago.
RA2lover
RA2lover
Walker
Walker

Posts : 382
Join date : 2010-10-11
Age : 29
Location : Brazil

Back to top Go down

onejet hover finge  Empty Re: onejet hover finge

Post by freek4ever Fri Dec 16, 2011 7:34 am

OKE
freek4ever
freek4ever
Tank
Tank

Posts : 97
Join date : 2011-08-26
Age : 27
Location : nederland holand

Back to top Go down

onejet hover finge  Empty Re: onejet hover finge

Post by Timothy Ashtön Fri Dec 16, 2011 2:19 pm

darkeye22 wrote:Oh and most of the Old/Experienced players sort of lost interest in RigidChips so they don't post very often and not very many new players find us :\

HEY! Once a builder, always a builder! They haven't lost interest, their brain is on a vacation!
Timothy Ashtön
Timothy Ashtön
Walker
Walker

Posts : 289
Join date : 2010-07-17
Age : 31
Location : Ontario

http://wildfrontierguidecomplete.blogspot.com/

Back to top Go down

onejet hover finge  Empty Re: onejet hover finge

Post by RA2lover Fri Dec 16, 2011 6:45 pm

the reason i haven't developed RC models is because RigidChipsDesigner simply stopped working.
RA2lover
RA2lover
Walker
Walker

Posts : 382
Join date : 2010-10-11
Age : 29
Location : Brazil

Back to top Go down

onejet hover finge  Empty Re: onejet hover finge

Post by freek4ever Sat Dec 17, 2011 3:31 pm

Mine is still runing
freek4ever
freek4ever
Tank
Tank

Posts : 97
Join date : 2011-08-26
Age : 27
Location : nederland holand

Back to top Go down

onejet hover finge  Empty Re: onejet hover finge

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum