My amphibous

by supershade Tue Mar 01, 2011 7:10 am

Code:: // [RCD] Val { ARM(default=0, max=500000, step=20000) ARM2(default=0, max=500000, step=20000) ARM3(default=0, max=500000, step=20000) ARM4(default=0, max=500000, step=20000) ENGINE(default=0, min=-100000, max=100000, step=5000) ENGINE2(default=0, max=50000, step=2000) ENGINE3(default=0, min=-1000, max=1000, step=250) ENGINE4(default=0, min=-100000, max=100000, step=10000) ENGINE5(default=0, min=-5000, max=5000, step=5000) FRONTHANDLE(default=0, min=-30, max=30, step=4.5) HANDLE(default=0, min=-25, max=25, step=5) HANDLE2(default=-90, min=-90, max=90) HANDLE3(default=90, min=-180, max=90) LIFT(default=0, min=-25, max=25, step=5) LR(default=0, min=-30, max=30, step=4.5) } Key { 0:ENGINE(step=500), ENGINE3(step=250), ENGINE4(step=500) 1:ENGINE(step=-500), ENGINE3(step=-250), ENGINE4(step=-500) 2:HANDLE(step=5) 3:HANDLE(step=-5) 4:FRONTHANDLE(step=-10) 5:FRONTHANDLE(step=10) 6:LR(step=-4.5) 9:ARM(step=200000), ARM2(step=25000), ARM3(step=15000), ARM4(step=5000), ENGINE2(step=2000) 10:LR(step=4.5) 11:HANDLE2(step=-10), HANDLE3(step=3) 12:ENGINE5(step=500) 13:HANDLE2(step=10), HANDLE3(step=-3) 14:LIFT(step=5) 15:LIFT(step=-5) 16:ENGINE5(step=-500) } Body { Core() { W:Chip() { N:Chip() { } W:Chip(angle=-FRONTHANDLE) { N:Chip() { N:Chip() { W:Chip() { N:Chip(angle=-20) { N:Chip(angle=20) { } } } N:Chip(angle=-20) { N:Chip(angle=20) { } } } } W:Chip() { W:Chip() { W:Chip(angle=45) { N:Chip() { N:Chip() { } } } N:Chip() { N:Chip() { W:Chip(angle=-90) { N:Chip() { E:Trim(angle=HANDLE) { } } } N:Chip(angle=-20) { N:Chip(angle=20) { } } } } S:Chip(angle=-20) { S:Chip(angle=20) { } } W:Chip(angle=-90) { N:Chip() { } S:Chip() { E:Trim(angle=-HANDLE) { } } } } N:Chip() { } S:Chip(angle=-20) { W:Wheel(angle=90, power=-ENGINE5, option=1) { } S:Chip(angle=20) { } } } S:Chip(angle=-20) { E:Wheel(angle=90, power=ENGINE5, option=1) { } S:Chip(angle=20) { } } W:RLW(angle=90, option=1) { } } } E:TrimF(angle=90) { E:TrimF(angle=90) { E:Chip() { S:Chip() { } E:Chip(angle=FRONTHANDLE) { S:Chip() { S:Chip() { S:Chip(angle=20) { S:Chip(angle=-20) { } } } } E:Chip() { E:Chip() { E:Chip(angle=-45) { S:Chip() { S:Chip() { } } } S:Chip() { S:Chip() { W:Chip() { S:Chip(angle=20) { S:Chip(angle=-20) { } } } S:Chip(angle=20) { S:Chip(angle=-20) { } } E:Chip(angle=90) { S:Chip() { W:Trim(angle=HANDLE) { } } } } } N:Chip(angle=20) { N:Chip(angle=-20) { } } E:Chip(angle=90) { S:Chip() { } N:Chip() { W:Trim(angle=-HANDLE) { } } } } S:Chip() { } N:Chip(angle=20) { E:Wheel(angle=-90, power=-ENGINE5, option=1) { } N:Chip(angle=-20) { } } } N:Chip(angle=20) { W:Wheel(angle=-90, power=ENGINE5, option=1) { } N:Chip(angle=-20) { } } E:RLW(angle=-90, option=1) { } } } S:Frame() { S:Frame() { S:Chip() { E:Frame(angle=90, spring=1, damper=0.6) { E:Frame() { E:TrimF(angle=HANDLE, spring=1, damper=0.6) { N:Chip() { N:Chip() { E:Chip(angle=-90) { S:Chip() { } E:Chip(angle=-90) { S:Chip() { E:Chip(angle=-90) { } S:Frame() { S:Chip() { S:Chip() { } } } } E:Chip(angle=-90) { } N:Wheel(angle=-HANDLE2, power=-ENGINE2) { N:Arm(angle=90, power=ARM2, option=200000, spring=1) { } W:Arm(angle=90, power=ARM, option=200000, spring=1) { } E:Arm(angle=90, power=ARM3, option=200000, spring=1) { } S:Arm(angle=90, power=ARM4, option=200000, spring=1) { } } } } } } S:Chip() { S:Chip() { } } } } } E:TrimF(angle=LR) { E:Chip() { } } S:Chip() { S:Rudder(angle=-HANDLE) { S:Chip(spring=1, damper=0.7) { E:Chip() { S:Weight() { E:Wheel(angle=-90, power=-ENGINE5, option=1) { } W:RLW(angle=-90, option=1) { } } } S:Chip(angle=90) { S:TrimF(angle=HANDLE) { W:Weight() { } E:Weight() { } } } W:Wheel(angle=-90, power=ENGINE5, option=1) { } } } S:Jet(angle=90, power=-ENGINE4) { } } N:Jet(power=ENGINE3) { } S:Jet(angle=-90, power=ENGINE4) { } S:Jet(power=ENGINE3) { } } } } } N:Chip(angle=90) { W:Weight() { N:Jet(angle=90, power=-ENGINE) { } } E:Weight() { N:Jet(angle=90, power=-ENGINE) { } } } S:Chip(angle=89) { E:Weight() { } W:Weight() { } N:Weight() { W:Chip() { } E:Chip() { } N:Arm(angle=LIFT, power=ARM, option=200000) { } } } N:Weight(angle=-90) { W:Chip() { } E:Chip() { } N:Arm(angle=LIFT, power=ARM2, option=200000) { } } } N:Frame() { N:Frame() { N:Chip() { W:Frame(angle=-90, spring=1, damper=0.6) { W:Frame() { W:TrimF(angle=HANDLE, spring=1, damper=0.6) { S:Chip() { S:Chip() { W:Chip(angle=90) { N:Chip() { } W:Chip(angle=90) { N:Chip() { N:Frame() { N:Chip() { N:Chip() { } } } } W:Chip(angle=90) { } S:Wheel(angle=HANDLE2, power=-ENGINE2) { W:Arm(angle=-90, power=ARM3, option=200000, spring=1) { } N:Arm(angle=-90, power=ARM2, option=200000, spring=1) { } E:Arm(angle=-90, power=ARM4, option=200000, spring=1) { } S:Arm(angle=-90, power=ARM, option=200000, spring=1) { } } } } } E:Chip(angle=90) { } } N:Chip() { N:Chip() { } } } } } W:TrimF(angle=LR) { W:Chip() { } } N:Chip() { N:Rudder(angle=HANDLE) { N:Chip(spring=1, damper=0.7) { W:Chip() { N:Weight() { W:Wheel(angle=90, power=-ENGINE5, option=1) { } E:RLW(angle=90, option=1) { } } } N:Chip(angle=-90) { N:TrimF(angle=HANDLE) { W:Weight() { } E:Weight() { } } } E:Wheel(angle=90, power=ENGINE5, option=1) { } } } N:Jet(angle=-90, power=ENGINE4) { } } S:Jet(power=-ENGINE3) { } N:Jet(angle=90, power=-ENGINE4) { } N:Jet(power=-ENGINE3) { } } } } } }

I may make flight possible...this is the latest version I have made of this, so please tell me how I did. EDIT; I have the most recent version of this here I hope this is okay to do...this forum is my contribution to this official rigidchips english speaking forums, It has a requests section for people who are unable to make their ideas come true...The forum was made to help aid in the restocking of rigidchips vehicles. If Juz and Bwansy join then I will make them full Admins as this is a contribution to their forum.