Hi, i could do with some help?
4 posters
Page 1 of 1
Hi, i could do with some help?
Hi
I recently found RigidChips through this site / forum, but i am not here to talk about that.
Just wondering, is the latest version 1.5b?, if not can somebody tell me where to download the newest version, thanks.
Also, i was wondering where i should start, as at just a quick glance at the 'Files' forum seems very daunting.
I am also sure i found a manual but can't seem to find it again!
Thanks for your help, i hope i am not to much trouble.
Thanks
Hellome
I recently found RigidChips through this site / forum, but i am not here to talk about that.
Just wondering, is the latest version 1.5b?, if not can somebody tell me where to download the newest version, thanks.
Also, i was wondering where i should start, as at just a quick glance at the 'Files' forum seems very daunting.
I am also sure i found a manual but can't seem to find it again!
Thanks for your help, i hope i am not to much trouble.
Thanks
Hellome
Hellome- Plane
- Posts : 42
Join date : 2011-02-24
Age : 26
Location : Here
Re: Hi, i could do with some help?
the latest version is 1.5b26, which can be downloaded here.
after extracting it, you can run it by executing Rigidchips15B26.exe, and open the pre-made models.
you can make models by analyzing their syntax and using a text editor, but i would suggest the fan-made RigidChips Designer, which can be downloaded here. in order to extract it, you'll need a .izh compatible extractor, like winrar or 7zip.
the files section files can be made by opening a text editor, pasting the code in the code section, then saving the file as a .txt file.
after extracting it, you can run it by executing Rigidchips15B26.exe, and open the pre-made models.
you can make models by analyzing their syntax and using a text editor, but i would suggest the fan-made RigidChips Designer, which can be downloaded here. in order to extract it, you'll need a .izh compatible extractor, like winrar or 7zip.
the files section files can be made by opening a text editor, pasting the code in the code section, then saving the file as a .txt file.
RA2lover- Walker
- Posts : 382
Join date : 2010-10-11
Age : 29
Location : Brazil
Re: Hi, i could do with some help?
Hey there Hellome,
I was the one who posted the link to this forum on TPT's forum.
I hope you enjoy playing RigidChips. If you want to start making models have a look at this https://rigidchips.forumotion.com/t45-rigid-chips-glossary
You can also look a this for some more specific help. https://rigidchips.forumotion.com/t161-rigidchips-english-documentation
I was the one who posted the link to this forum on TPT's forum.
I hope you enjoy playing RigidChips. If you want to start making models have a look at this https://rigidchips.forumotion.com/t45-rigid-chips-glossary
You can also look a this for some more specific help. https://rigidchips.forumotion.com/t161-rigidchips-english-documentation
madbob2- Tank
- Posts : 87
Join date : 2010-07-16
Age : 27
Location : Orz Lake.x
Hellome- Plane
- Posts : 42
Join date : 2011-02-24
Age : 26
Location : Here
Re: Hi, i could do with some help?
If you don't have a Lua path, no need to worry. Just extract the contents of the .zip file into your models folder, and bake sure that there is a folder called "Bernard", with .lua files inside.
JHaskly- Admin
- Posts : 235
Join date : 2010-07-16
Age : 28
Location : Brisbane
Hellome- Plane
- Posts : 42
Join date : 2011-02-24
Age : 26
Location : Here
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum